straighten
Sized to the wall
Built to the measured width, so the vanity meets both walls instead of leaving a gap packed with trim.
Built to measure
Custom bathroom vanities in Louisville are built to the width the wall really is and to the waste pipe already sitting in the floor.
Custom bathroom vanities in Louisville cover the carcass, the drawer boxes and doors, the finish, and the cut-out for whatever basin you choose. The countertop is quoted separately when it is stone, because that is templated once the base is in and level.
The layout inside is the part worth spending time on. A single deep drawer that has to be cut around a bottle trap is worth less than two shallow ones that clear it.
Built to the measured width, so the vanity meets both walls instead of leaving a gap packed with trim.
Waste and supply positions come off the survey first, so drawers clear them instead of being cut about on site.
Edges, cut-outs and the toe kick are sealed properly, because that is where a bathroom cabinet actually gives up.
Each stage is signed off before the next one starts.
We measure the room itself rather than working from the plan, because walls are rarely square and the plan is rarely what got built. Every opening gets checked.
You get a layout and a written estimate broken down by stage, so you can see what the doors cost against the boxes against the install. Free, nothing to sign.
Cabinetry is built to the measurements we took, in the wood, door style and finish you picked. Lead time depends on the scope and we tell you before you commit.
Scribed to the walls, levelled, and fixed properly. Hardware adjusted so every door and drawer sits straight before we leave.
The wall, the waste pipe and the door swing decide the vanity. The style comes after.
Anyone whose bathroom is an awkward width. Stock vanities come in fixed sizes, so in a 54 inch alcove you either lose six inches to a filler panel or drop to a unit that is too small for the room.
It also matters where the plumbing is not where a stock unit expects it. Older Louisville bathrooms in the Highlands and St. Matthews often have waste coming through the floor in a position nobody would choose today.
We survey the room first: wall to wall at three heights, since old walls are rarely parallel, plus the waste and supply positions and the door swing. Those numbers set the width and the internal layout.
Then the vanity is built and finished in the shop, which is where a sprayed finish gets done properly. Fitting is usually a day, scribed to the wall so the ends sit tight.
Vanities price like the rest of custom cabinetry, so nationally that is roughly $500 to $1,200 per linear foot for full custom, and $150 to $650 semi-custom. A single-basin vanity is a short run, so the total sits well below a kitchen.
Finish moves it more than size. A painted finish costs more than a stained one on the same box, and a wall-hung vanity adds the framing needed to carry the load.
A vanity holds what fits under a basin, which is less than people expect. Towels and spares usually want their own home, and that is bathroom storage & linen cabinets.
Where two people share the room in the morning, double vanity cabinets are the fix, provided the wall is long enough. The same shop builds custom closets in Louisville, custom kitchen cabinets in Louisville and built-ins & bookcases in Louisville, and we cover the metro including cabinets in Jeffersontown and cabinets in Lyndon.
Get a free written estimate and we will measure your Louisville bathroom before quoting.
Yes, and that is usually the point. Waste and supply positions come off the survey and the drawer layout is drawn around them, which is what a stock unit cannot do.
Whatever the wall measures, which is the advantage. Stock sizes come in fixed increments, so a 54 inch alcove means either a filler panel or a unit that is too small for the room.
Somewhat, because the wall has to carry the load and that sometimes means adding framing. The gain is a floor you can clean under and a room that feels larger.
A sprayed finish with the edges, the sink cut-out and the toe kick properly sealed. Vanities almost never fail at the joinery, they fail where water gets under an edge.
We stay inside about 20 miles of Louisville, close enough to measure, template and install without the schedule slipping. These are the areas we cover most often.
Tell us the room and what you want out of it. You get a written estimate broken down by stage, free, with nothing to sign.